Motor Protection Circuit Breaker

Motor Protection Circuit Breaker

Disconnect for Motor Branch Circuit.
Branch-Circuit, Short-Circuit Protection (Magnetic Protection).
Overload Protection (Thermal Protection).
Switching (Manual).

Motor Protection Circuit Breaker

3VE

DZ108(3VE) is suitable in AC circuit of 50Hz or 60Hz, voltage up to 660V and current up to 0.1-63A and used toprevent small capacity motor and circuit from overload and short circuit and also used as direct starter forstarting the motor and a switch for changeover the circuit under normal conditions.

3RV

DZS8(3RV) Series Motor Protection Circuit Breaker are mainly used for the overload, short-circuit and phase-failure protection for motors in the circuit of AC50/60Hz, Rated operating voltage up to 660V, Rated operating current from 0.11A to 25A. They can be also used for circuit protection in the circuit of 0.11 ~ 25A.

3VU

DZS7(3VU) Series Motor Protection Circuit Breaker are applicable for the circuit of AC 50/60Hz, Rated insulation voltage 750V, Rated operating voltage up to 660V, Rated operation current from 0.1A ~ 63A, The are used for protecting motors against overload, short-circuit and phase-failure, They can also be used for starting and stopping starters for motors, and for the circuit protection in the circuit of 0.1 ~ 63A.

Motor Protection Circuit Breaker

GV2

DZ518(GV2) Series motor protecting breaker are mainly used fo the overload and shortcircuit protection of the motor in AC 50/60Hz, up to 660V, 0.1-80A power circuit, as a full-voltage starter to start and cut off the motor, under the AC3 load or for the overload and shortcircuit protection of the circuit and power equipment in the power distribution network.

GV3

DZ519 breaker (GV3 Motor Circuit Breaker) is applied to comtrol theoverload, phade-broken,short-circuir protection and non-frequent start of three-pha squirrel-cage asynchronous electromotor in the circui withmax AV 690 and 1A- 80Acurrent,and is used as distribrtion line protrction and nonfre quent overload conversion, and is also usedas the isolator.

Motor Protection Circuit Breaker

M611

M611 is suitable for using in circuit up to AC 660V or 440V and current 0.1 to 63A. It can be used for protection of overload and short circuit of 3-phase squirrel-cage motors, and starters of motors as well at full voltage. It is suitable to protect the motor with under voltage trip. It can also be used in operating AC single phase load and DC load. It can monitor the fuse of switch disconnector to act as protection of phase failure. This product includes basic type switch and 26 accessories with purposes of expand- ing usage.

Motor Protection Circuit Breaker

PKZM0

PKZM0 Motor Protective Circuit Breaker is applicable for the circuit of AC 50/60Hz, rated insulation voltage 750V, rated operating voltage up to 660V, rated operating current from 0.1A to 25A. It is used for protecting the motor against overload, short-circuit and phase-failure. It can be also used for starting and breaking the starter of motor and for the circuit protection in the circuit of 25A

Disclaimer: The appearance of the products listed on this website, color, parameters are for reference only, issued a kind of LANGIR Electric Company shall prevail.
LANGIR Electric Company reserves the right to modify or cancel the relevant parameters of this website does not advance notice. If in doubt, please contact customer service hotline.